Product Details
Place of Origin: dongguan,China
Brand Name: HOTHMI
Model Number: TFT-H024A16QVIST6N10
Payment & Shipping Terms
Minimum Order Quantity: 2
Delivery Time: 25 days
Payment Terms: L/C, D/A, T/T, D/P, Western Union, MoneyGram
Supply Ability: 99999
Display Format: |
240x320 Pixels |
Outline L X W X H: |
42.52x59.61x2.20mm |
Active Area L X W: |
36.72x48.96mm |
Luminance: |
600cd/m2 |
Interface:=: |
SPI |
Controller Type: |
ST7789 |
Operating Temperature: |
-30°C ~ 80°C |
Display Format: |
240x320 Pixels |
Outline L X W X H: |
42.52x59.61x2.20mm |
Active Area L X W: |
36.72x48.96mm |
Luminance: |
600cd/m2 |
Interface:=: |
SPI |
Controller Type: |
ST7789 |
Operating Temperature: |
-30°C ~ 80°C |
2.4 Inch 240x320 SPI Industrial Monitor TFT LCD Display Manufacturer Sunlight Readable
TFT-H024A16 | 2.4" IPS LCD | 240x320 Pixels | Industrial Monitor | TFT LCD Display Manufacturer | -30°C ~ 80°C | IC ST7789V | Sunlight Readable
General information
|
Item |
Specification |
Unit |
|
|
Outline Dimension |
42.52x59.61x2.20mm |
mm |
|
|
Display area |
36.72x48.96mm |
mm |
|
|
Number of Pixel |
240(H) x 320(V) |
pixels |
|
|
Pixel pitch |
- |
mm |
|
|
Pixel arrangement |
SPI |
|
|
|
Display mode |
Normally Black |
|
|
|
NTSC |
70(Typ.) |
% |
|
|
Surface treatment |
Antiglare, Hard-Coating (3H) |
|
|
|
Weight |
- |
g |
|
|
Back-light |
Single LED (Side-Light type) |
|
|
|
Power Consumption |
Logic System (White Pattern) |
ST7789V |
W |
|
B/L System |
- |
W |
|
Pin Description
| Pin NO. |
Symbol |
Description |
| 1 | LEDA |
LED anode |
| 2 | VCI |
Power supply |
| 3 | CSX |
Chip selection pin.Low enable. |
| 4 | RESX |
Reset signal. Signal is active low |
| 5 | SCL |
This pin is used to be serial interface clock. |
|
6 |
SDI |
SPI interface input pin. The data is latched on the rising edge of the SCL signal. |
|
7 |
D/CX |
Display data/command selection pin in 4-line serial interface. |
| 8 | SDO |
SPI interface output pin.The data is output on the |
| 9 | LEDK |
LED cathode |
| 10 | GND |
Power supply ground |
All Products
|
Reliability Testing |
Customers can expect all production parts to meet or exceed operational requirements over temperature, humidity, and vibration. |
|
Glass Cleanliness |
Customers can expect glass to be protected by liners and presented mindful of cleanliness standards. This means glass will be clean of contaminants, fingerprints, and other foreign material. |
|
Bezel Appearance |
Bezels will be uniformly painted free of foreign materials and distracting cosmetic blemishes. Our standards maintain a clean scratch-free surface. |
|
PCB Appearance |
PCB’s are delivered with long-term reliability in mind. Finishes are free of bubbles, foreign contaminants, and meet all UL fire requirements. PCB materials will always be delivered within industry norms. PCB edges will be cleanly cut and void of burrs. |
|
Soldering |
Soldering of all leaded and SMT components is consistent in providing the mechanical security and electrical connectivity. |
|
Consistency |
Our manufacturing and inspection processes ensure product consistency from lot to lot. This means orders processed over the years will continually meet your expectations. We do this by exacting manufacturing specifications, with attention to detail in our processes, and by comparing to the golden units. |
|
Product Integrity |
Quality in product manufacturing ensures integrity in construction. Customers can expect tight assembly without worry of loose parts or missing material. Our products will meet all environmental expectations including temp, humidity, & vibration conditions. |
|
Glass Color |
While normal variations of glass color may occur (due to manufacturing tolerances), Newhaven Display maintains color compliance per internal approved color charts. These charts are maintained to ensure any minor glass deviations are identified and corrected as needed. |
|
ESD Protection & Safety |
All devices are designed and handled in consideration of ESD protection. This includes ESD-SAFE packaging within anti-static bags, wraps, and trays. Customers are reminded to always follow ESD safety to best protect the devices. |
Search keyword: tft 2.4, tft 2.4", 2.4 tft lcd, 2.4" tft lcd, 2.4 inch tft lcd, tft lcd 2.4, 2.4 tft display, 2.4" tft display,2.4 inch tft display, tft display 2.4, tft display 2.4"
TFT Custom Solutions
Cable Customization
Adjust the length, position, and pinout of your cables or add additional connectors. Get a cable solution that’s precisely designed to make your connections streamlined and secure.
Touchscreen Add-on
Enhance your user experience with capacitive or resistive touch screen technology. We’ll adjust the glass thickness or shape of the touch panel so it’s a perfect fit for your design.
Interface Customization
Choose from a wide selection of interface options or talk to our experts to select the best one for your project. We can incorporate HI, USB, SPI, VGA and more into your display to achieve your design goals.
Cover Glass
Equip your display with a custom cut cover glass to improve durability. Choose from a variety of cover glass thicknesses and get optical bonding to protect against moisture and debris.
